1 :: Front bumper brackets are included in this kit.
2 :: Does Not fit models equipped with automatic transmission.
3 :: Option front bumper raising kit is required to raise the front bumper [BKIT2/3]
4 :: Vehicles with 1 piece solid steering shaft must install longer aftermarket steering shaft with body lift.
5 :: It may be necessary to drill the front two body bushing sleeves out to ½" for new bolt clearance.
6 :: Front and rear bumper brackets are included in this kit.
7 :: Modification to the front frame horns required to raise the front bumper using the bumper brackets included.
8 :: Will Not fit 2 wheel drive with power steering.
9 :: Will not fit 2 wheel drive with steering gear box close to firewall (behind front axle).
10 :: Installation on models equipped with V-8 will require replacement of lower radiator hose and fan.
11 :: Vehicles equipped with 6cyl will require replacment of lower radiator hose to avoid contact with smog pump.
12 :: It will be necessary to drill out some of the body bushings to accommodate larger bolts.
13 :: Front bumper brackets will need to be modified for use on 2" kit.
14 :: Will Not fit vehicle equipped with diesel engine.
15 :: Steering extension included.
16 :: Vehicles equipped with Vortec V-6 may requier modification of the air intake hose.
17 :: 3" kit includes front and rear bumper brackets, 2" kit includes front bumper brackets only.
18 :: Rear bumper can be raised using the stock bumper brackets.
19 :: Installation on vehicles with air conditioning will require modification to the radiator mounting flange.
20 :: Manual transmission models will require part# 3700 shift extension. [Mazda transmission Only]
21 :: Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing.
22 :: Kit will Not work on vehicles equipped with moveable pedal package.
23 :: 95-03 ZR2 will require modification to steering column mounting flange.
24 :: Gap guards available and sold seperately for this application.
25 :: Rear bumper brackets are available and sold seperately for this application.
26 :: No bumper brackets are included in this kit.
27 :: Front bumper can be raised using stock bumper brackets.
28 :: Manual transmission models require a shift lever extension or linkage bracket sold seperately.
29 :: -
30 :: Will Not fit vehicle equipped with gasoline engine.
31 :: S-15 Blazer rear bumper with factory tow hitch cannot be raised.
32 :: Requires cutting the lower radiator core support and installing new brackets provided.
33 :: 2006 manual transmission models require kit# SE9627 shift extension.
34 :: Automatic transmission models require kit# 9628 shift extension bracket.
35 :: Requires cutting the front bumper fascia to allow clearance for front frame horns.
36 :: Can Not use tow hooks.
37 :: Some cutting / trimming required.